Asheville Brewers Supply
1/2" Stainless Ball Valve
$ 16.75
Built from 304 stainless steel, this ball valve features 1/2" FPT threads on each end. Perfect for kettles, pumps, chillers, or whatever else your system demands. Easy to clean. Just use two wrenches to separate the two piece valve.
12" Laboratory Thermometer
$ 7.00
If you're looking for a near-instant temperature reading, this laboratory thermometer is the way to go. Has an eye hole at the top for running string through if desired. Range 0- 220F; 0-120C.
AlcoEngine Copper Pot Still Condenser
$ 138.00
The Copper Pot Still is perfect when you want the flavor of the wash to come through, whereas a Reflux Still is more favorable for producing pure, unflavored spirits. If you want to make whiskeys and gins, this pot still top is a great way to start! The classic "V" shape captures the vital esters, aldehydes, and phenolic compounds that are neces...
AlcoEngine Copper Reflux Still Condenser
$ 138.00
The Copper Reflux Still Condenser is designed to create high percentage pure neutral spirit. It features a flow management device, which makes it extremely easy to use. No need to worry about fine tuning the water flow speed. As long as your providing enough coolant or cold water running through the condenser, the flow rate doesn't matter. The ...
Big Daddy Dial Thermometer
$ 9.75
Easy to use stainless dial thermometer with 12" probe and clips onto the side of your kettle for constant temperature monitoring. Range 0- 220F.
Brewzilla Distillation Lid
$ 34.00
Use this lid along with the 35L BrewZilla or DigiBoil and a copper still top to make your own easy-to-use distillery. This lid has a 1.85 in. (47 mm) hole for the still top. Lid gasket included. Made from 304 stainless steel. Measures 12.25" in diameter.
Brewzilla Neoprene Jacket
$ 27.00
Add some insulation to your Robobrew/Brewzilla/Digiboil to get better boils! These Jackets will fit both 35 L Robobrews and help keep the heat in for quicker and more vigorous boils. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 35 L Robobrew/Brewzilla/Digiboil with pump and without pump Made from thick neopre...
Brewzilla V4 Allgrain Brewery with Pump 110V
$ 599.99
FREE SHIPPING! This may not be in-store and we can drop ship it to you at no charge. The Brewzilla (formerly RoboBrew) is an all-in-one electric brewing system that has built in elements for heating and boiling, a built in pump for recirculation, an onboard water resistant control panel for setting and monitoring temperatures, a removable grain ...
Calcium Chloride (2 oz)
$ 2.25
Acidifies mash and creates a more malt-centric, rounded, and sweet profile on the palate.
Mash Paddle (stainless)
$ 19.75
Made of a heavy duty FOOD GRADE stainless steel. Perfect for mixing and stirring. Dimension of the paddle: Height 4.7" X 3.1" widthTotal Length: 26"
Mashtun (10gal)
$ 185.00
A complete mashtun! Comes with stainless steel ball valve and stainless steel 12" domed false bottom. These work wonderfully for all-grain brewing.
Paddle (Plastic)
$ 5.50
24 inches. Perfect paddle for stirring wort or mash. Heat-resistant plastic is suitable for temperatures up to 360F.
Rice Hulls 1lb
$ 2.75
Added to grain bill to help even mash temps and ensure lautering, especially when using huskless adjunct---such as rye, wheat, or corn---or flaked adjunct.
Stainless 1/2" FPT Full Coupler
$ 5.25
1/2" FPT (female pipe thread) full coupler has threads through the entire center. Roughly 1.5" length. 304 stainless.
Stainless 1/2" MPT Locknut
$ 5.25
1/2" FPT (female pipe thread) locknut. 304 stainless steel.
Stainless 1/2" MPT Nipple
$ 5.25
1/2" MPT (male pipe thread) nipple with hex center for easy installation and removal. 304 stainless steel.
