Asheville Brewers Supply
1/2" Stainless Ball Valve
$ 16.75
Built from 304 stainless steel, this ball valve features 1/2" FPT threads on each end. Perfect for kettles, pumps, chillers, or whatever else your system demands. Easy to clean. Just use two wrenches to separate the two piece valve.
AlcoEngine Copper Reflux Still Condenser
$ 138.00
The Copper Reflux Still Condenser is designed to create high percentage pure neutral spirit. It features a flow management device, which makes it extremely easy to use. No need to worry about fine tuning the water flow speed. As long as your providing enough coolant or cold water running through the condenser, the flow rate doesn't matter. The ...
Oxygenation System
$ 55.75
Includes filter, regulator, stainless diffusion stone, and tubing. It's everything you need, except for the disposable oxygen tank, which is available at most hardware stores. Providing sufficient oxygen will help ensure a faster start to fermentation, full attenuation, and helps eliminate off-flavors due to stressed yeast (assuming a proper pit...
Stainless 1/2" FPT Full Coupler
$ 5.25
1/2" FPT (female pipe thread) full coupler has threads through the entire center. Roughly 1.5" length. 304 stainless.
Stainless 1/2" MPT Locknut
$ 5.25
1/2" FPT (female pipe thread) locknut. 304 stainless steel.
Stainless 1/2" MPT Nipple
$ 5.25
1/2" MPT (male pipe thread) nipple with hex center for easy installation and removal. 304 stainless steel.
Stainless Steel Inline Aeration/Oxygenation Diffusion Stone
$ 34.58
A 304 Stainless Steel inline oxygenation tee with 2 Micron stone. Just hook your O2 line to the barb on the infusion stone and you're ready to infuse wort with pure oxygen as it passes through. We recommend using teflon tape on the threads to ensure a tight seal. Threads are 1/2" NPT.NOTE: May take up to three weeks for delivery.
