Duotight Push-In Fitting - 8mm OD x 7/8" Female Beer Thread

Product Description

This Duotight fitting will connect 8mm OD EVABarrier to Sanke taps and 7/8" beer shanks. These are great to have if you ever put commercial kegs on your draft system without having to switch over your tubing. Includes a sealing washer.

About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings that use a double EPDM seal to ensure a solid, leak-free connection under a variety of situations. This makes it very easy to swap fittings and lines without clamps or fear of leaks.

To ensure a leak-proof seal, please cut tubing as squarely as possible, using a razor or very sharp knife. We recommend the Tube Cutter w/ Duotight Removal Tool for this.

$ 3.49

Tab 1

1/2" Auto-Siphon

$ 19.25

26" long 1/2" auto-siphon by Fermtech. Quickly and easily transfers liquids twice as fast as a 3/8" racking cane. Includes 6 feet of 1/2" vinyl tubing. Auto siphon clamp sold separately.

1/2" MPT Fermentap Dial Thermometer

Equipment

$ 31.00

1/2" MPT Fermentap Dial Thermometer

$ 31.00

This is not the weldless assembly, only the dial thermometer with 1/2" MPT threads. This is intended to be threaded into any 1/2" FPT coupler, such as you'll find standard on the Brew Built kettles. Made of 304 stainless steel. 3" face. Available with either a 2.5" probe (more suitable for kettles) or a 6" probe (more appropriate for a mashtun)....

1/2" Stainless Ball Valve

Equipment

$ 16.75

1/2" Stainless Ball Valve

$ 16.75

Built from 304 stainless steel, this ball valve features 1/2" FPT threads on each end. Perfect for kettles, pumps, chillers, or whatever else your system demands. Easy to clean. Just use two wrenches to separate the two piece valve.

1/4" Flare Nut w/ Tailpiece

Equipment

From $ 2.75

1/4" Flare Nut w/ Tailpiece

$ 2.75

These flare hexnuts attach to any 1/4" male flare threads, such as those found on MFL disconnects. You have the option of either a 1/4" barb or 5/16" barb; the former is used for liquid (beer) lines, whereas the latter is common for gas (CO2) lines. Swivel nuts are chrome-plated, but barbs are stainless.

1/4" Stainless Tailpiece

Equipment

$ 4.75

1/4" Stainless Tailpiece

$ 4.75

Tailpieces are fittings that connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with a collar nut. Can also connect to a keg tap. Requires a tailpiece gasket and hex beer nut. Stainless steel constr...

12" Laboratory Thermometer

Equipment

$ 7.00

12" Laboratory Thermometer

$ 7.00

If you're looking for a near-instant temperature reading, this laboratory thermometer is the way to go. Has an eye hole at the top for running string through if desired. Range 0- 220F; 0-120C.