Brewmaster
1/4" Stainless Tailpiece
$ 4.75
Tailpieces are fittings that connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with a collar nut. Can also connect to a keg tap. Requires a tailpiece gasket and hex beer nut. Stainless steel constr...
5/16" Stainless Tailpiece
$ 4.50
Tailpieces are fittings that connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with a collar nut. Can also connect to a keg tap. Requires a tailpiece gasket and hex beer nut. Stainless steel constr...
Dual Gauge Nitrogen/Argon Regulator - (Taprite)
$ 100.00
A high-quality dual-gauge Nitrogen and Argon regulator for beer, winemaking, and nitro cold-brew coffee.  This can be used to dispense Argon, Nitrogen, or BeerGas mixes (used for Guinness, and other nitro beer).  This is a CGA 580 Regulator, proudly made in the USA by Taprite.
Sanke Beer type (D-Style) - Taprite
$ 43.99
D-Style sanke keg beer tap. The most frequently used keg coupler in America for draft beer dispensing. Comes with pressure relief valve. High quality construction to stand up to the rigors of commercial dispensing. Made in America by Taprite.
Stainless Tailpiece Elbow - 3/16" ID
$ 8.25
Tailpieces are fittings that connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with a collar nut. Can also connect to a keg tap. Requires a tailpiece gasket and hex beer nut. Stainless steel constr...
Torpedo Keg Buoy Floating Dip Tube
$ 20.00
Ensure the purest pour from start to finish with the Torpedo Buoy™ floating dip tube. This set features a 3-inch metal dip tube, 23.5 inches of 1/4-inch ID silicone tubing, and a stainless steel ball float. Designed to fit any ball lock or pin lock homebrew keg, it is optimized for 5-gallon kegs but can be trimmed to suit 1.5 or 2.5-gallon sizes.
