Brewmaster
1/4" Stainless Tailpiece
$ 4.75
Tailpieces are fittings that connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with a collar nut. Can also connect to a keg tap. Requires a tailpiece gasket and hex beer nut. Stainless steel constr...
5/16" Stainless Tailpiece
$ 4.50
Tailpieces are fittings that connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with a collar nut. Can also connect to a keg tap. Requires a tailpiece gasket and hex beer nut. Stainless steel constr...
Beer Thread Tailpiece Hex Nut
$ 2.75
Use this nut to attach a tailpiece barb to a shank or keg tap in your draft system. Fits standard male beer threaded shanks or taps. 1" outside dimension with 5/8" opening. Made from stainless steel. Don't forget a tailpiece gasket.
Draft Beer Faucet Cleaning Adapter
$ 9.75
This adapter allows you to backflush your draft dispensing system for a more efficient cleaning. Simply remove your faucet and screw the adaptor into the shank. The barb is 3/8". Made from brass.
Draft Line Cleaning Kit
$ 69.00
This kit is perfect for cleaning your kegerator's lines and faucets! Clean out those dirty draft beer lines! Beer flavor gets funky when your tap, line, and faucet are filled with gunk. We recommend that you ideally clean your lines after every keg. Our kit comes with a 1 qt hand pump that pushes Beer Line Cleaner (4 oz size included) through t...
Silicone Tubing (High Temperature, Thick Wall)
$ 3.00
Sold by the foot. Odorless, tasteless, and inert Silicone tubing is FDA food-grade approved from -100F to 500F. Translucent natural color allows you to see the flow. The perfect tubing for building a personal brewery, especially for any time that the wort is in contact with tubing will be above 180F. This tubing is not designed to hold pressures...
Stainless Tailpiece Elbow - 3/16" ID
$ 8.25
Tailpieces are fittings that connect beer and gas tubing to the different parts of a draft system. One side of the tailpiece features a barb to connect the tubing to, and the other side is held against the tap or faucet shank with a collar nut. Can also connect to a keg tap. Requires a tailpiece gasket and hex beer nut. Stainless steel constr...
Torpedo Keg Buoy Floating Dip Tube
$ 20.00
Ensure the purest pour from start to finish with the Torpedo Buoy™ floating dip tube. This set features a 3-inch metal dip tube, 23.5 inches of 1/4-inch ID silicone tubing, and a stainless steel ball float. Designed to fit any ball lock or pin lock homebrew keg, it is optimized for 5-gallon kegs but can be trimmed to suit 1.5 or 2.5-gallon sizes.
