Equipment
1/2" Stainless Ball Valve
$ 16.75
Built from 304 stainless steel, this ball valve features 1/2" FPT threads on each end. Perfect for kettles, pumps, chillers, or whatever else your system demands. Easy to clean. Just use two wrenches to separate the two piece valve.
AlcoEngine Copper Reflux Still Condenser
$ 138.00
The Copper Reflux Still Condenser is designed to create high percentage pure neutral spirit. It features a flow management device, which makes it extremely easy to use. No need to worry about fine tuning the water flow speed. As long as your providing enough coolant or cold water running through the condenser, the flow rate doesn't matter. The ...
Domed Stainless Steel False Bottom
$ 38.00
Available in a 9 or 12 inch diameter, these false bottoms perfectly fit round 5 gallon and 10 gallon water coolers, respectively. The design allows for heavy grain bills and even lautering for better efficiency during the sparge. Also suitable in converted sankey kegs. Made from stainless steel with 3/32” perforated holes on 5/32” centers. 3/8" ...
Fermentap Weldless Dial Thermometer
$ 29.75
A wonderful addition to your mashtun, kettle, or HLT. Complete assembly includes the dial thermometer and probe, bulkhead, and silicone gasket. Constructed from 304 stainless. Available with either a 2" probe (more suitable for kettles) or a 6" probe (more appropriate for a mashtun).
Oxygenation System
$ 55.75
Includes filter, regulator, stainless diffusion stone, and tubing. It's everything you need, except for the disposable oxygen tank, which is available at most hardware stores. Providing sufficient oxygen will help ensure a faster start to fermentation, full attenuation, and helps eliminate off-flavors due to stressed yeast (assuming a proper pit...
Stainless 1/2" FPT Barb
$ 5.25
1/2" FPT (female pipe thread) with either a 1/2" or 3/8" barb. Perfect for attaching to any 1/2" MPT fitting, such as found on pumps. 304 stainless steel.
Stainless 1/2" FPT Full Coupler
$ 5.25
1/2" FPT (female pipe thread) full coupler has threads through the entire center. Roughly 1.5" length. 304 stainless.
Stainless 1/2" MPT Barb
$ 5.25
1/2" MPT (male pipe thread) with either a 1/2" or 3/8" barb. Perfect for insertion into a ball valve or other 1/2" FPT port. 304 stainless steel.
Stainless 1/2" MPT Locknut
$ 5.25
1/2" FPT (female pipe thread) locknut. 304 stainless steel.
Stainless 1/2" MPT Nipple
$ 5.25
1/2" MPT (male pipe thread) nipple with hex center for easy installation and removal. 304 stainless steel.
Stainless in-line Oxygenation Assembly
$ 79.80
A stainless steel in-line oxygenation assembly with thermometer and 2 micron O2 stone. All fittings are 1/2" NPT and barbs are 1/2" Note: May take up to three weeks to deliver.
Stainless Steel Inline Aeration/Oxygenation Diffusion Stone
$ 34.58
A 304 Stainless Steel inline oxygenation tee with 2 Micron stone. Just hook your O2 line to the barb on the infusion stone and you're ready to infuse wort with pure oxygen as it passes through. We recommend using teflon tape on the threads to ensure a tight seal. Threads are 1/2" NPT.NOTE: May take up to three weeks for delivery.
Stainless Weldless Ball Valve
$ 34.75
Perfect for conversion projects such as building a mashtun or adding a ball valve to your brew kettle. No welding required, just a 1" diameter hole. Weldless kit includes a 1/2" Full Port ball valve and a 1/2" barb. All fittings are made from 304 type stainless steel for a lifetime of corrosion free use.
