Equipment
1/2" MPT Fermentap Dial Thermometer
$ 22.00
This is not the weldless assembly, only the dial thermometer with 1/2" MPT threads. This is intended to be threaded into any 1/2" FPT coupler, such as you'll find standard on the Brew Built kettles. Made of 304 stainless steel. 3" face. Available with either a 2.5" probe (more suitable for kettles) or a 6" probe (more appropriate for a mashtun)....
1/2" Stainless Ball Valve
$ 16.75
Built from 304 stainless steel, this ball valve features 1/2" FPT threads on each end. Perfect for kettles, pumps, chillers, or whatever else your system demands. Easy to clean. Just use two wrenches to separate the two piece valve.
AlcoEngine Copper Pot Still Condenser
$ 138.00
The Copper Pot Still is perfect when you want the flavor of the wash to come through, whereas a Reflux Still is more favorable for producing pure, unflavored spirits. If you want to make whiskeys and gins, this pot still top is a great way to start! The classic "V" shape captures the vital esters, aldehydes, and phenolic compounds that are neces...
AlcoEngine Copper Reflux Still Condenser
$ 138.00
The Copper Reflux Still Condenser is designed to create high percentage pure neutral spirit. It features a flow management device, which makes it extremely easy to use. No need to worry about fine tuning the water flow speed. As long as your providing enough coolant or cold water running through the condenser, the flow rate doesn't matter. The ...
Blichmann Hellfire Burner
$ 245.00
The most fiery burner on the market has what it takes to speed along your brew day. With enough power to keep a rolling boil on a 20 gallon batch of beer, this burner gets it done! Features include: •Dual mode capability; high power mode and high efficiency mode. Simple operation - just crank up the gas and adjust the damper for more power! Hi...
Brewers Best Stainless Kettle False Bottom
$ 62.50
Available in both 8 and 16 gallon sizes. This false bottom will fit either the Brewers Best Basic Kettle or the Brewers BEAST Kettle. A simple option for converting a kettle to a stainless mashtun or to help filter out hop debris from the boil. Dimensions: 8 gallon- 11.5"16 gallon- 15.5"
Brewzilla V4 Allgrain Brewery with Pump 110V
$ 599.99
FREE SHIPPING! This may not be in-store and we can drop ship it to you at no charge. The Brewzilla (formerly RoboBrew) is an all-in-one electric brewing system that has built in elements for heating and boiling, a built in pump for recirculation, an onboard water resistant control panel for setting and monitoring temperatures, a removable grain ...
Domed Stainless Steel False Bottom
$ 38.00
Available in a 9 or 12 inch diameter, these false bottoms perfectly fit round 5 gallon and 10 gallon water coolers, respectively. The design allows for heavy grain bills and even lautering for better efficiency during the sparge. Also suitable in converted sankey kegs. Made from stainless steel with 3/32” perforated holes on 5/32” centers. 3/8" ...
Fermentap Weldless Dial Thermometer
$ 29.75
A wonderful addition to your mashtun, kettle, or HLT. Complete assembly includes the dial thermometer and probe, bulkhead, and silicone gasket. Constructed from 304 stainless. Available with either a 2" probe (more suitable for kettles) or a 6" probe (more appropriate for a mashtun).
Stainless 1/2" FPT Barb
$ 5.25
1/2" FPT (female pipe thread) with either a 1/2" or 3/8" barb. Perfect for attaching to any 1/2" MPT fitting, such as found on pumps. 304 stainless steel.
Stainless 1/2" FPT Full Coupler
$ 5.25
1/2" FPT (female pipe thread) full coupler has threads through the entire center. Roughly 1.5" length. 304 stainless.
Stainless 1/2" MPT Barb
$ 5.25
1/2" MPT (male pipe thread) with either a 1/2" or 3/8" barb. Perfect for insertion into a ball valve or other 1/2" FPT port. 304 stainless steel.
Stainless 1/2" MPT Locknut
$ 5.25
1/2" FPT (female pipe thread) locknut. 304 stainless steel.
Stainless 1/2" MPT Nipple
$ 5.25
1/2" MPT (male pipe thread) nipple with hex center for easy installation and removal. 304 stainless steel.
Stainless Weldless Ball Valve
$ 34.75
Perfect for conversion projects such as building a mashtun or adding a ball valve to your brew kettle. No welding required, just a 1" diameter hole. Weldless kit includes a 1/2" Full Port ball valve and a 1/2" barb. All fittings are made from 304 type stainless steel for a lifetime of corrosion free use.
