Products
Aluminum Gas Manifold - 1/4" Flare (KOMOS)
$ 30.00
If you are connecting multiple kegs to your gas supply a manifold is the best way to distribute that gas and give you the flexibility to have much more individual control over your dispensing. This KOMOS manifold features 1/4" flare gas inlet and check valves that provide the ability to choose the types of connectors and sizes you will use to co...
Double Offset Draft Tower Wrench - (KOMOS)
$ 19.75
This double offset wrench is designed to make it much easier to remove nuts from shanks in draft towers, coffin boxes, jockey boxes, or other tight spots where a traditional wrench can't operate. Features a 1 1/16" 12-point wrench on one end and a 1 1/8" 12-point wrench on the other end. These are the most common shank nut sizes. This wrench i...
Dual Body CO2 Regulator - (KOMOS)
$ 115.00
The KOMOS Dual Body CO2 Regulator is perfect for serving two different beers at two different pressures using a single CO2 tank. This beefy, industrial-grade regulator will serve you well for years to come. The robust dual-body and precision diaphragms provide high flow rates, and the pressures can be easily and precisely adjusted with the hand ...
Duotight 8mm OD In-Line Regulator
$ 21.50
This Duotight fitting will connect to an 8mm OD EVABarrier line and will adjust the pressure on both liquid and gas. This is great for setting individual keg serving pressures or making adjustments to flow without affecting the rest of your setup. Can be completely disassembled for thorough cleaning and sanitizing. Functions from 0-150 PSI. The ...
Duotight Circlip Retaining Clip - 8mm (5/16") - Pack of 10
$ 5.00
Secure your 8mm Duotight connections with this 8mm OD Circlip. Prevent unwanted release of the fitting by ensuring the collar stays firmly in place. Really handy for peace of mind - especially with those gas connections. Includes 10 Circlips. About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings tha...
Duotight Coupler 8mm OD (5/16")
$ 2.79
This coupler fits 8mm OD line. Use to fit two lengths of EVABarrier line together. About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings that use a double EPDM seal to ensure a solid, leak-free connection under a variety of situations. This makes it very easy to swap fittings and lines without clamp...
Duotight Push-In Fitting - 6.5mm x 8mm Reducer
$ 2.79
This Duotight reducer fitting can be attached to the Intertap Short Shank with a 6.5mm (1/4") Duotight compatible barb. Compatible with EVABarrier 8 mm OD Tubing. Will also be necessary for connecting to Duotight compatible ball lock carbonator caps. (coming soon) About Duotight Fittings - Duotight fittings are very high-quality, high-performanc...
Duotight Push-In Fitting - 8mm (5/16 in.) Ball Valve
$ 3.99
This Duotight Ball Valve will connect to an 8mm OD EVABarrier line to provide a secure shut off for both liquids and gasses. About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings that use a double EPDM seal to ensure a solid, leak-free connection under a variety of situations. This makes it very eas...
Duotight Push-In Fitting - 8mm (5/16 in.) Female x 3/8 in. Male BSP
$ 3.19
This Duotight fitting will connect to an 8mm OD EVABarrier line and 3/8 in threaded connections. This works incredibly well for attaching EVABarrier lines directly to Nukatap and Intertap faucets. Handy for filling bottles and growlers and for cleaning tap lines! Includes an o-ring for a tight seal. About Duotight Fittings - Duotight fittings ar...
Duotight Push-In Fitting - 8mm (5/16 in.) Female x 8mm (5/16 in.) Male Elbow
$ 2.50
This Duotight fitting will connect to an 8mm OD EVABarrier line and female 8mm OD fittings for neater and rigid connections in tight spaces. About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings that use a double EPDM seal to ensure a solid, leak-free connection under a variety of situations. This m...
duotight Push-In Fitting - 8mm (5/16") OD Elbow Female x Female
$ 2.49
This Duotight fitting will connect to 8mm OD EVABarrier line for 90-degree connections. About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings that use a double EPDM seal to ensure a solid, leak-free connection under a variety of situations. This makes it very easy to swap fittings and lines without ...
Duotight Push-In Fitting - 8mm OD Check Valve
$ 3.59
This Duotight fitting allows flow in one direction only and is recommended to protect your regulator from beer backflowing through the line. It opens at 1 PSI to allow the gas to flow out but not back. Place these after any splits, tees, or connections to multiple kegs to ensure a leak in one keg doesn't empty the gas from all of your connected ...
Duotight Push-In Fitting - 8mm OD Gas Manifold w/ Check Valves
$ 12.50
Dual O-Ring Sealing System: Built with premium EPDM double O-rings that double the sealing surface compared to standard push-in fittings, delivering maximum reliability and a completely leak-free gas system. Flexible Modular Design: Includes integrated check valves on every outlet to block backflow, with removable ball valves and a simple pop...
Duotight Push-In Fitting - 8mm OD In-Line Regulator
$ 8.99
This Duotight fitting will connect to an 8mm OD EVABarrier line and will adjust the pressure on both liquid and gas. This is great for setting individual keg serving pressures or making adjustments to flow without affecting the rest of your setup. Can be completely disassembled for thorough cleaning and sanitizing. Functions from 0-150 PSI. The ...
Duotight Push-In Fitting - 8mm OD Plug
$ 1.49
This Duotight 8mm plug is optimal for detecting gas leakage and sealing off unused junctions in tees or other connectors. Deemed suitable for both liquid and gas configurations. About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings that use a double EPDM seal to ensure a solid, leak-free connection ...
Duotight Push-In Fitting - 8mm OD Tee
$ 3.19
This Duotight fitting is what you'll need to connect compatible 8mm OD EVABarrier lines in a "tee" configuration. This is ideal for gas connections that are split over multiple kegs. About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings that use a double EPDM seal to ensure a solid, leak-free connec...
Duotight Push-In Fitting - 8mm OD x 1/4" BSP/MPT
$ 2.59
This Duotight fitting will connect 8mm OD EVABarrier line and 1/4" BSP/FPT threads. The included o-ring will create an airtight seal with 1/4" FPT fittings that you can find on manifolds, regulators, and other connectors without the need for Teflon/PTFE tape. About Duotight Fittings - Duotight fittings are very high-quality, high-performance pus...
Duotight Push-In Fitting - 8mm OD x 1/4" Female Flare
$ 4.49
This Duotight fitting is what you'll need to connect a compatible 8mm OD EVABarrier line to your flared ball-lock or pin-lock disconnects. It will work on any 1/4" MFL (male flare) connection. About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings that use a double EPDM seal to ensure a solid, leak-f...
Duotight Push-In Fitting - 8mm OD x 7/8" Female Beer Thread
$ 3.49
This Duotight fitting will connect 8mm OD EVABarrier to Sanke taps and 7/8" beer shanks. These are great to have if you ever put commercial kegs on your draft system without having to switch over your tubing. Includes a sealing washer. About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings that use a...
Duotight Rigid Plastic Joiner 6mm ID x 8mm OD (5/16") x 50mm (2") L
$ 1.00
This rigid joiner is made from strong polypropylene. It's useful to make solid, rigid joints with push-in fittings that are dead straight. This is a good option to keep your connections plumb and true. The 50mm (2") length is long enough so even after pushing right into two Duotight 8mm fittings on both ends, you should still have an exposed len...
Mini-Gauge for Inline Regulator & Blowtie G2
$ 7.00
This mini pressure gauge is compatible with the BlowTie 2 spunding valve & Duotight in-line regulator. We recommend using the gauge with a range closest to your desired pressure setting. Pressure Range: 0-15 psi (0-1 bar) Body Dimensions: 26mm x 26mm x 15mm Probe Diameter: 8mm WARNING: Do not exceed gauge pressure. Exceeding the pressure ...
Premium Dual Gauge CO2 Regulator - (KOMOS)
$ 69.00
The KOMOS Dual Gauge CO2 Regulator is a beefy, industrial-grade regulator that provides consistent, worry-free performance. The robust body and precision diaphragm provide high flow rates, and the pressure can be easily and precisely adjusted with the hand dial. Extra thick stainless gauges come with rubber bumpers for added protection. The di...
