Products
1/4" Flare Nut w/ Tailpiece
$ 2.75
These flare hexnuts attach to any 1/4" male flare threads, such as those found on MFL disconnects. You have the option of either a 1/4" barb or 5/16" barb; the former is used for liquid (beer) lines, whereas the latter is common for gas (CO2) lines. Swivel nuts are chrome-plated, but barbs are stainless.
6- Way Gas Manifold
$ 69.00
Gas manifold with shutoffs. Hook up 6 gas lines at once.
Aluminum Gas Manifold - 1/4" Flare (KOMOS)
$ 30.00
If you are connecting multiple kegs to your gas supply a manifold is the best way to distribute that gas and give you the flexibility to have much more individual control over your dispensing. This KOMOS manifold features 1/4" flare gas inlet and check valves that provide the ability to choose the types of connectors and sizes you will use to co...
Beer Thread Tailpiece Hex Nut
$ 2.75
Use this nut to attach a tailpiece barb to a shank or keg tap in your draft system. Fits standard male beer threaded shanks or taps. 1" outside dimension with 5/8" opening. Made from stainless steel. Don't forget a tailpiece gasket.
Corny Keg Post
$ 8.95
These stainless steel posts fit Cornelius kegs and include universal poppet assemblies. For easy identification, the gas posts are notched at the hex base, whereas the liquid posts are not. 19/32"-18 threads
Double Offset Draft Tower Wrench - (KOMOS)
$ 19.75
This double offset wrench is designed to make it much easier to remove nuts from shanks in draft towers, coffin boxes, jockey boxes, or other tight spots where a traditional wrench can't operate. Features a 1 1/16" 12-point wrench on one end and a 1 1/8" 12-point wrench on the other end. These are the most common shank nut sizes. This wrench i...
Duotight 8mm OD In-Line Regulator
$ 21.50
This Duotight fitting will connect to an 8mm OD EVABarrier line and will adjust the pressure on both liquid and gas. This is great for setting individual keg serving pressures or making adjustments to flow without affecting the rest of your setup. Can be completely disassembled for thorough cleaning and sanitizing. Functions from 0-150 PSI. The ...
duotight Ball Lock Quick Disconnect - Beverage Out
$ 9.50
Innovation in plastic ball lock quick disconnects has arrived! The new duotight Ball Lock Quick Disconnects bring simplicity, adaptability, and convenience to your home brewery and draft systems. The integrated duotight compact design makes it easy to connect, disconnect, switch lines, and reconfigure systems. The quick disconnects are easy to a...
duotight Ball Lock Quick Disconnect - Gas In
$ 9.50
Innovation in plastic ball lock quick disconnects has arrived! The new duotight Ball Lock Quick Disconnects bring simplicity, adaptability, and convenience to your home brewery and draft systems. The integrated duotight compact design makes it easy to connect, disconnect, switch lines, and reconfigure systems. The quick disconnects are easy to a...
Duotight Circlip Retaining Clip - 8mm (5/16") - Pack of 10
$ 5.00
Secure your 8mm Duotight connections with this 8mm OD Circlip. Prevent unwanted release of the fitting by ensuring the collar stays firmly in place. Really handy for peace of mind - especially with those gas connections. Includes 10 Circlips. About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings tha...
Duotight Coupler 8mm OD (5/16")
$ 2.79
This coupler fits 8mm OD line. Use to fit two lengths of EVABarrier line together. About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings that use a double EPDM seal to ensure a solid, leak-free connection under a variety of situations. This makes it very easy to swap fittings and lines without clamp...
duotight Flow Control Ball Lock Quick Disconnect - Beverage Out
$ 17.50
The duotight Flow Control Ball Lock Quick Disconnect lets you easily balance beer lines with adjustable resistance. Perfect for serving a wide variety of carbonation levels, this disconnect features an integrated duotight connection to ensures an easy and secure coupling and consistent performance. The integrated duotight compact design makes it...
Duotight Push-In Fitting - 6.5mm x 8mm Reducer
$ 2.79
This Duotight reducer fitting can be attached to the Intertap Short Shank with a 6.5mm (1/4") Duotight compatible barb. Compatible with EVABarrier 8 mm OD Tubing. Will also be necessary for connecting to Duotight compatible ball lock carbonator caps. (coming soon) About Duotight Fittings - Duotight fittings are very high-quality, high-performanc...
Duotight Push-In Fitting - 8mm (5/16 in.) Ball Valve
$ 3.99
This Duotight Ball Valve will connect to an 8mm OD EVABarrier line to provide a secure shut off for both liquids and gasses. About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings that use a double EPDM seal to ensure a solid, leak-free connection under a variety of situations. This makes it very eas...
Duotight Push-In Fitting - 8mm (5/16 in.) Female x 3/8 in. Male BSP
$ 3.19
This Duotight fitting will connect to an 8mm OD EVABarrier line and 3/8 in threaded connections. This works incredibly well for attaching EVABarrier lines directly to Nukatap and Intertap faucets. Handy for filling bottles and growlers and for cleaning tap lines! Includes an o-ring for a tight seal. About Duotight Fittings - Duotight fittings ar...
Duotight Push-In Fitting - 8mm (5/16 in.) Female x 8mm (5/16 in.) Male Elbow
$ 2.50
This Duotight fitting will connect to an 8mm OD EVABarrier line and female 8mm OD fittings for neater and rigid connections in tight spaces. About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings that use a double EPDM seal to ensure a solid, leak-free connection under a variety of situations. This m...
duotight Push-In Fitting - 8mm (5/16") OD Elbow Female x Female
$ 2.49
This Duotight fitting will connect to 8mm OD EVABarrier line for 90-degree connections. About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings that use a double EPDM seal to ensure a solid, leak-free connection under a variety of situations. This makes it very easy to swap fittings and lines without ...
Duotight Push-In Fitting - 8mm OD Check Valve
$ 3.59
This Duotight fitting allows flow in one direction only and is recommended to protect your regulator from beer backflowing through the line. It opens at 1 PSI to allow the gas to flow out but not back. Place these after any splits, tees, or connections to multiple kegs to ensure a leak in one keg doesn't empty the gas from all of your connected ...
Duotight Push-In Fitting - 8mm OD Gas Manifold w/ Check Valves
$ 12.50
Dual O-Ring Sealing System: Built with premium EPDM double O-rings that double the sealing surface compared to standard push-in fittings, delivering maximum reliability and a completely leak-free gas system. Flexible Modular Design: Includes integrated check valves on every outlet to block backflow, with removable ball valves and a simple pop...
Duotight Push-In Fitting - 8mm OD In-Line Regulator
$ 8.99
This Duotight fitting will connect to an 8mm OD EVABarrier line and will adjust the pressure on both liquid and gas. This is great for setting individual keg serving pressures or making adjustments to flow without affecting the rest of your setup. Can be completely disassembled for thorough cleaning and sanitizing. Functions from 0-150 PSI. The ...
Duotight Push-In Fitting - 8mm OD Plug
$ 1.49
This Duotight 8mm plug is optimal for detecting gas leakage and sealing off unused junctions in tees or other connectors. Deemed suitable for both liquid and gas configurations. About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings that use a double EPDM seal to ensure a solid, leak-free connection ...
Duotight Push-In Fitting - 8mm OD Tee
$ 3.19
This Duotight fitting is what you'll need to connect compatible 8mm OD EVABarrier lines in a "tee" configuration. This is ideal for gas connections that are split over multiple kegs. About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings that use a double EPDM seal to ensure a solid, leak-free connec...
Duotight Push-In Fitting - 8mm OD x 1/4" BSP/MPT
$ 2.59
This Duotight fitting will connect 8mm OD EVABarrier line and 1/4" BSP/FPT threads. The included o-ring will create an airtight seal with 1/4" FPT fittings that you can find on manifolds, regulators, and other connectors without the need for Teflon/PTFE tape. About Duotight Fittings - Duotight fittings are very high-quality, high-performance pus...
Duotight Push-In Fitting - 8mm OD x 1/4" Female Flare
$ 4.49
This Duotight fitting is what you'll need to connect a compatible 8mm OD EVABarrier line to your flared ball-lock or pin-lock disconnects. It will work on any 1/4" MFL (male flare) connection. About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings that use a double EPDM seal to ensure a solid, leak-f...
Duotight Push-In Fitting - 8mm OD x 7/8" Female Beer Thread
$ 3.49
This Duotight fitting will connect 8mm OD EVABarrier to Sanke taps and 7/8" beer shanks. These are great to have if you ever put commercial kegs on your draft system without having to switch over your tubing. Includes a sealing washer. About Duotight Fittings - Duotight fittings are very high-quality, high-performance push-in fittings that use a...
Duotight Rigid Plastic Joiner 6mm ID x 8mm OD (5/16") x 50mm (2") L
$ 1.00
This rigid joiner is made from strong polypropylene. It's useful to make solid, rigid joints with push-in fittings that are dead straight. This is a good option to keep your connections plumb and true. The 50mm (2") length is long enough so even after pushing right into two Duotight 8mm fittings on both ends, you should still have an exposed len...
Faucet Handle - Black Plastic
$ 5.50
A durable black plastic handle sized for standard beer faucets. This 2.5" cylindrical design delivers reliable grip and clean aesthetics for draft systems, whether you're setting up a home bar or upgrading existing tap hardware.
Faucet- Chrome with Stainless Lever
$ 22.00
A standard chrome plated faucet that attaches to normal shanks [1 1/8” – 18 Thread (North American Beer Industry Standard)]. Do be aware that this plunger design does stick if the faucet isn't used frequently; this is caused by small amounts of beer moving into the forward chamber with the piston and then drying. Unlike many other chrome faucets...
Faucet- Stainless Steel
$ 35.00
A standard stainless faucet that attaches to normal shanks [1 1/8” – 18 Thread (North American Beer Industry Standard)]. Unlike chrome faucets, stainless will last forever without ever contributing off-flavors. Do be aware that this plunger design does stick if the faucet isn't used frequently; this is caused by small amounts of beer moving into...
Fiber Washer For CO2 Regulators
$ 0.99
If you have a regulator that requires fiber washers you must replace it every time you swap or fill a tank. The special compression design ensures better performance and a longer lifespan compared to standard gaskets. Proper installation helps prevent leaks and other potential CO2 regulator issues. Do not use this with KOMOS or Taprite regulator...
Kegging Equipment Kit- Complete
$ 300.00
Contains 5 Gallon Stainless Steel Ball Lock Keg (select used or new), Black Liquid Disconnect with 1/4" barb, Gray Gas Disconnect with 1/4" MFL, Hose Clamps, Picnic Dispensing Faucet, Hex Nuts For MFL Disconnects, Taprite Primary Dual Gauge Regulator, Swivel Barbs For MFL Disconnect, Picnic Tap and Tubing, Gas Tubing, and 5lb CO2 Tank ...
Mark II Keg Washer
$ 100.00
Conserve time, energy, and water! Mark’s Mark II Keg Washer™ is designed to clean and sanitize large vessels like cornelius kegs and carboys. It is also serves as a sanitation container for miscellaneous items such as airlocks, thermometers, tubing, keg fittings, and more. Includes adapters to clean tubing. You can even set it up to hook to keg ...
Mini-Gauge for Inline Regulator & Blowtie G2
$ 7.00
This mini pressure gauge is compatible with the BlowTie 2 spunding valve & Duotight in-line regulator. We recommend using the gauge with a range closest to your desired pressure setting. Pressure Range: 0-15 psi (0-1 bar) Body Dimensions: 26mm x 26mm x 15mm Probe Diameter: 8mm WARNING: Do not exceed gauge pressure. Exceeding the pressure ...
Nukatap - Gen 2 Stainless Faucet with Flow Control
$ 66.50
We REALLY like these forward sealing Nukatap faucets- they're the most innovative faucet we've seen since Perlick, and at a more reasonable price! Made entirely of stainless steel, these will last a long time , are completely rebuildable, and due to their unique design, off-flavors and "sticking" are prevented. Flow control helps with those fini...
NUKATAP Counter Pressure Bottle Filler
$ 80.00
The NUKATAP Counter Pressure Bottle Filler is the absolute best value for your money on the market today. From bottling up a few to take to a gathering, or sending your award-winning beers off for competition, this bottle filler offers convenience and performance at a great price.  Fill bottles directly from your keg with virtually no CO2 los...
Nukatap- Stainless Faucet
$ 46.50
We REALLY like these forward sealing Nukatap faucets- they're the most innovative faucet we've seen since Perlick, and at a more reasonable price! Made entirely of stainless steel, these will last a loooooong time and due to their unique design, off-flavors and "sticking" are prevented. Addtitionally, the faucet tips are interchangeable, allowi...
Nylon Washer For CO2 Regulators (KOMOS)
$ 1.09
The nylon washer helps form an airtight seal between the KOMOS regulator and your gas cylinder. Great to have on hand for when one is lost or wears out. Should be replaced regularly to ensure the regulator to tank connection stays gas-tight.
Picnic Faucet - Duotight Compatible Black Plastic
$ 5.99
The standard plastic handheld faucet is modified for use with Duotight fittings and EVABarrier draft tubing. The 6.5mm end piece can be paired with the 8mm x 6.5mm Duotight reducer to use with 8mm OD EVABarrier tubing. Commonly called a "cobra tap" or "picnic faucet". Duotight reducing fitting sold separately.
Poppet
$ 2.75
Universal poppet assembly for homebrew keg posts. Will work for ball lock or pin lock posts. We've refurbished dozens, if not hundreds, of kegs using these! Easy to install.
Sankey Coupler (Stainless)
$ 46.00
Also known as a D-style coupler, this fits domestic commercial kegs. All contact points for the beer are made out of 304 grade stainless steel. This quality coupler will provide many years of reliable use without imparting off-flavors. **Does not include the beer nut/tailpiece.** This may be ordered separately here.
